What Can You Do to Prevent Fall From Heights Risks?

What Can You Do to Prevent Fall From Heights Risks?

17th June 2020

Are you planning to complete some task from the roof, a ladder, or any other raised surface where you could potentially fall and injure yourself? Such projects require diligent preparation and protection as far as your safety is concerned. One simple mistake or neglect can result in serious consequences. You need to implement the correct safety procedures to eliminate the risk or reduce its harm. Read on for some of the essential things to consider to prevent falls from height in your workplace.

 

  1. Understand Fall Distance

Wearing a fall protection equipment will be pointless if it fails to engage before you hit a lower level. Fall distance is a very complicated factor that requires a proper calculation to ensure the effectiveness of your protection equipment. You’ll need to consider a number of factors such as the lanyard length, possible sag in the harness, and your body length below the D-ring. You need to be sure you have enough fall clearance before you can use the system.

 

  1. Select the Proper Equipment

When choosing the Personal Fall Arrest System (PFAS) to wear, it’s important that you choose the proper equipment. This includes choosing equipment that meets the relevant safety standards and fits perfectly. Most PFAS are not one-size-fits-all and you need to ensure you have the right size. Price shouldn’t be the guiding factor when looking to buy the equipment. Rather, focus on what you really need to get the job done safely. Each situation is different, so you need to do enough research before proceeding to purchase the equipment. You may also consider the comfort of the equipment, especially if you intend to be staying long working at heights. However, this comes with an extra cost.

 

  1. Inspect Your Access Equipment and PPE

Lanyards and harnesses need to be inspected more frequently by a competent person to ensure they are in good condition. PPE and access equipment such as fixed access ladders should also be inspected prior to every use. Proper training is essential to ensure the workers know exactly what to look for during the inspection and the steps to take should there be an issue. The inspection should be thorough as it could be the difference between life and death.

 

  1. Use Railing

Employers are recommended to install railing in areas with fall risks. This is a form of passive protection that’s easy to install and requires no training or use of extra equipment, provided the workers stay within the rail. They are very effective in keeping your workforce safe while achieving compliance. There are different railing systems that you can choose from, depending on your preference and the design of the area to be installed.

 

  1. Implement Proper Training

Your employees must be properly trained for them to work safely at heights. Only trained and competent workers should be allowed to work at heights. There’s too much room for confusion and error for an untrained worker trying to protect themselves at height. You need to arm your workers with all the relevant knowledge to keep themselves safe. The training should also cover the proper use of PPE and how to respond to different incidents.