5 Essential Tips on How to Set-Up Rooftop Walkway Pads With Fall Protection in Mind

5 Essential Tips on How to Set-Up Rooftop Walkway Pads With Fall Protection in Mind

15th October 2019

Several commercial and industrial buildings have rooftop walkway pads set-up. While the alignment of these pads has efficiency as the primary goal, some are rarely set-up with fall protection in mind. It’s even more sensitive when the path comes close or runs closely parallel to a rooftop edge. Walkway pads require the right set of circumstances to enhance their effective integration into a fall protection plan. Below is a list of essential suggestions on some of the right set of circumstances to include when setting up your walkway system. Please read on.  

  1. Ensure the Walkway Starts at the Point of Access

You need the walkway pads to be effective. These include having a clear direction for the walkway path as soon as you step through the self-closing gate at your roof. You don’t want to be struggling to find the path while at the roof as this can be very very risky.

  1. Enhance the Visibility of the Walkway

What’s the point of having a rooftop walkway path if people will be having a hard time seeing it? This is the roof. Your safety should be the first priority, and you shouldn’t take it for granted at all. To enhance the visibility of your walkway system, ensure to use one that’s of a completely different colour from that of your existing roof. This will prevent any confusion and hence enhance your workers’ fall protection.

  1. Keep the Walkways as Simple as Possible

You need to be mindful of the complexity of your walkway system. Workers should be able to traverse the roof with ease without worries of getting lost, especially if you’re operating a large-sized manufacturing building. If you’ll need to include signage, ensure to keep it less complicated. You can also add directions if possible, for convenience. You should also choose your walkway material carefully. Galvanised and aluminium walkways are the most popular materials recommended for efficient walkway systems.

  1. Keep Rooftop Walkways Away From the Hazard or Rooftop Edge

There are a lot of projects that you can do on your roof. Some could be located near different hazards, and you’ll be traversing the roof once in a while. It’s important to point your pads away from these hazards. You may also need access to areas near the roof edges. Should this be your scenario, ensure that the walkway pads are pointing at a different direction from the edges. You’ll also need to have other alternative forms of fall protection, such as handrails, in place for maximum safety.

  1. Have a Rescue Plan in Place

In the event of a fall and the victim is saved by their fall arrest system, every minute counts. The life-critical rescue plan is most essential in any work at height project. Having the relevant PFAS alone may not be enough. Yes, your worker will be saved from the fall, but they could still be in danger, considering the suspension trauma that could set in soon after. The victim’s co-workers could also rush to the scene to try and rescue them, and this could put their own lives in danger, as well. Therefore, be sure to have proper means to rescue fall victims, including competent personnel to do the task.

The Bottom Line

Ensure to bring to attention any potential risk you experience while staying on the walkway to your employer or safety officer. Any issue that could influence you towards danger must be addressed accordingly. Remember, prevention is always the better solution!